Free New Brunswick Air Brake Practice Test
Preparing for your New Brunswick Air Brake Endorsement (Code E)? Our free, up-to-date Free New Brunswick Air Brake Practice Tests are designed to help you pass on your first attempt with full confidence. These practice tests are based on the Official New Brunswick Air Brake Manual, your most trusted resource for understanding how air brake systems work, learning correct inspection procedures, and mastering the essential safety regulations required for commercial drivers in New Brunswick.
What to Expect on the Official New Brunswick Air Brake (Endorsement E) Knowledge Test
To obtain the Air Brake Endorsement (Code A) on your New Brunswick commercial driver’s licence, you must successfully complete both a written knowledge test and a practical air brake inspection. Here’s what you can expect for the written portion:
Number of Questions
35
Time Limit
45 minutes
Passing Score
80%
Based On
Where to Write
New Brunswick Air Brake Endorsement – Frequently Asked Questions (FAQ)
The Air Brake Endorsement (Code E) allows licensed drivers to operate commercial vehicles equipped with air brake systems. It is mandatory for anyone driving vehicles such as large trucks or buses that use air brakes.
You need a Code A endorsement if you plan to operate any commercial motor vehicle with an air brake system—this includes most Class 1, 2, and 3 vehicles.
To get the endorsement, you must:
Hold a valid New Brunswick driver’s licence (Class 5 or higher)
Pass a written air brake knowledge test
Successfully complete a practical air brake inspection test
There are 25 multiple-choice questions, and you must score at least 80% to pass.
You have 45 minutes to complete the written air brake test.
The test is administered at Service New Brunswick (SNB) locations. It’s best to book an appointment in advance.
Yes. You should study the Official New Brunswick Air Brake Manual, which covers everything you need to know about air brake systems, inspection procedures, and safety regulations.
Yes, many driving schools in New Brunswick offer approved air brake endorsement courses. Completing a course can improve your chances of passing both the written and practical exams.
Once added, the Code A endorsement remains valid as long as your commercial driver’s licence is valid and not suspended or expired.
No, once you have the Air Brake Endorsement (Code A), it applies across all licence classes that permit the operation of air brake-equipped vehicles.
Free New Brunswick Commercial Test Practice – Air Brake (Code E) Endorsement for Class 1, 2, 3, and 4 Drivers
Getting your Air Brake Endorsement (Code E) in New Brunswick is a vital step toward operating commercial vehicles such as semi-trucks, buses, and other heavy-duty vehicles. Before hitting the road, you must pass both the written air brake knowledge test and a practical air brake inspection, as required by Service New Brunswick (SNB) and the New Brunswick Department of Transportation and Infrastructure.
Our New Brunswick Air Brake Practice Test is tailored specifically to New Brunswick’s testing standards—designed to help you pass confidently by mastering all key topics from the Official New Brunswick Air Brake Manual.
Why Choose Our New Brunswick Air Brake Practice Test?
✅ 100% Based on the New Brunswick Air Brake Manual
✅ Same format as the real test at Service New Brunswick (SNB)
✅ 25 multiple-choice questions per test
✅ Instant feedback to accelerate your learning
✅ Unlimited free attempts—no registration required
✅ Fully mobile-friendly and accessible from any device
Perfect for Drivers Who Are:
🚛 Studying for the Air Brake (Code E) Endorsement in New Brunswick
🚍 Upgrading to a Class 1, 2, 3, or 4 commercial licence
📦 Transitioning from another province (e.g. Nova Scotia or PEI)
📘 Looking for accurate and up-to-date New Brunswick Air Brake practice material
Ready to Start?
The path to earning your New Brunswick Air Brake Endorsement (Code A) starts here.
👉 Take the Free New Brunswick Air Brake Practice Test Now
📘 Download the Official New Brunswick Air Brake Manual (PDF)
📺 Watch Our Test Prep Videos on YouTube: @CanadianDriverKnowledgeTest
🌐 Visit: canadiandriverknowledgetest.ca
Air Brake System Components — Know Your Parts Inside and Out
To succeed on the Free New Brunswick Air Brake Practice Test, you must understand how each component of the system works:
Air Compressor: Driven by the engine, it compresses air for the brake system. New Brunswick regulations require a functioning governor to maintain proper cut-in (~85 psi) and cut-out (~135 psi) pressures.
Air Tanks (Reservoirs): Store compressed air. Daily draining is mandated by New Brunswick law to prevent corrosion and moisture-related freezing—key knowledge tested in the Free New Brunswick Air Brake Practice Test.
Brake Chambers: These use air pressure to move a diaphragm and apply the brakes. They’re frequently checked for cracks or leaks during inspections and are featured in our practice test material.
Slack Adjusters: Ensure pushrod stroke stays within safe limits. Knowing how to check manual and automatic slack adjusters is critical for both the road and the Free New Brunswick Air Brake Practice Test.
Governor: Regulates air pressure by cycling the compressor on and off. Expect questions on normal operating range and malfunction symptoms on the official test and in our Free New Brunswick Air Brake Practice Test.
Safety Valve: Protects the system from overpressure (typically releasing at 150 psi). This component plays a crucial role in many of our practice questions.
🔍 Test Insight: During your practical exam, you may be asked to identify and explain each of these components—just as we teach you in the Free New Brunswick Air Brake Practice Test.
Daily Air Brake Inspections & Leak Tests — Safety Starts Here
Inspection knowledge is essential to pass the Free New Brunswick Air Brake Practice Test and to stay safe on the road:
Drain Air Tanks Daily: This prevents freezing and internal corrosion.
Inspect Hoses, Tanks & Chambers: Watch for leaks, cracks, and physical damage—an important focus in our test questions.
Check Low-Air Warning System: Should activate around 60 psi.
Perform a Leak Test: Shut off the engine at full pressure and monitor for:
▪ 3 psi/min loss for single units
▪ 4 psi/min for combination vehicles
⚠️ Did You Know? Failing to perform a proper inspection is both a test failure risk and a real-world safety hazard. Our Free New Brunswick Air Brake Practice Test reinforces these procedures in detail.
Common Brake System Failures & Emergency Protocols — Know What To Do
Knowing how to respond to emergencies is a key topic on the Free New Brunswick Air Brake Practice Test:
Low Air Pressure: When the system drops too low, spring brakes will automatically apply. Recognizing this is vital for both your safety and test success.
Brake Fade: Typically caused by overheating during long downhill stretches. Use engine braking and the snub braking method, as emphasized in our practice scenarios.
Stuck Valves or Brake Drag: These issues can result in unsafe braking. You’re expected to identify symptoms in real-time—something we prepare you for in the Free New Brunswick Air Brake Practice Test.
Air Pressure Gauges & Monitoring — Master the Instruments
Monitoring instruments is a testable skill on the Free New Brunswick Air Brake Practice Test:
Primary & Secondary Gauges: These should read evenly and stay within normal operating pressure ranges.
Governor Monitoring: Watch for proper cut-in/cut-out cycles (~85–135 psi), as questions about this are common in our practice tests.
Low-Air Warnings: These must activate around 60 psi. The test will often include scenarios on warning system failures or delayed alerts, which we simulate in our Free New Brunswick Air Brake Practice Test.
Spring Brakes & Emergency Braking — Nova Scotia’s Last Line of Defense
Spring brakes are heavily featured on the Free New Brunswick Air Brake Practice Test, particularly in safety-related questions:
Automatic Engagement: They activate when air pressure drops below ~60 psi.
Emergency & Parking Use Only: Misuse during regular driving is both dangerous and illegal.
🚨 Expect to demonstrate and explain spring brake behavior during your practical test—and be ready for related questions on the Free New Brunswick Air Brake Practice Test.
Dual Air Brake Systems — Redundancy Saves Lives
Modern vehicles in New Brunswick use dual systems for safety, a topic frequently covered in the Free New Brunswick Air Brake Practice Test:
Two Separate Circuits: Usually front/rear or primary/secondary.
Independent Reservoirs: Each must be tested during inspections.
Failure Response: Know how to react if one system fails.
📘 We cover these systems in detail through real-world examples in the Free New Brunswick Air Brake Practice Test.
Manual vs Automatic Slack Adjusters — Inspection & Adjustment
Brake adjustment is a major focus of the Free New Brunswick Air Brake Practice Test:
Manual Slack Adjusters: Require frequent manual checks.
Automatic Slack Adjusters: Less maintenance but still require inspection.
Learn how to measure pushrod stroke and identify malfunction signs using visual aids and test questions featured in our Free New Brunswick Air Brake Practice Test.
Safe Driving Techniques with Air Brakes — Prevent Brake Failure
To succeed in the Free New Brunswick Air Brake Practice Test and on the road, apply these safe driving habits:
Snub Braking: Intermittent brake applications help prevent overheating.
Avoid Riding the Brakes: Preserves system pressure and prevents fade.
Use Engine Braking: Especially on hills and icy roads.
🚦 Expect scenario-based questions about these techniques on the Free New Brunswick Air Brake Practice Test.
Moisture & Freezing in Air Brake Systems — Cold Climate Hazards
Cold-weather brake issues are emphasized in both the New Brunswick Air Brake Manual and the Free New Brunswick Air Brake Practice Test:
Moisture Buildup: Can freeze and block air lines.
Daily Draining: Required to minimize moisture content.
Use Air Dryers or Alcohol Evaporators: These are vital in NB’s winter driving conditions.
❄️ Test questions may include cold-weather system failures and prevention strategies—topics fully covered in our Free New Brunswick Air Brake Practice Test.
Preparing for New Brunswick’s Practical Air Brake Test — Hands-On Skills You Need
The Free New Brunswick Air Brake Practice Test helps prepare you not just for the written portion but also for what’s expected in your practical test:
Build full system pressure
Test governor cut-in and cut-out
Perform leak and spring brake checks
Measure pushrod stroke
Complete a system walk-around inspection
💡 Mastering these steps in advance through our Free New Brunswick Air Brake Practice Test can greatly improve your confidence and performance on test day.