BRITISH COLUMBIA CLASS 1 LICENCE TEST 4

0 votes, 0 avg

1 / 30

Which of the following belts should you check during a pre-trip inspection:

Power steering belt

Alternator belt

All belts on the front of the engine

Water pump belt

2 / 30

When parking a single unit Class 3 motor vehicle uphill, without a curb, the front wheels should be:

Pointed straight ahead

Turned to the left

On the grass or sidewalk

Turned to the right

3 / 30

What is the maximum permissible length for a straight truck?

11.0 metres

12.0 metres

10.5 metres

12.5 metres

4 / 30

If a 'reserved lane' sign includes a list of hours of the day or days of the week on it, what do these mean?

They indicate when any vehicle can drive in that lane

They indicate when that lane is reserved

They indicate when the vehicles represented on the sign are not permitted to drive in that that

They indicate when that lane is not reserved

5 / 30

If doing a pre-trip air brake inspection, which of the below would be acceptable pressure levels for the air supply valve and park control valve to pop out at?

35 PSI for the air supply valve and 15 PSI for the park control valve

70 PSI for the air supply valve and 50 PSI for the park control valve

Any pressure, as long as it is roughly equal for both valves

50 PSI for the air supply valve and 30 PSI for the park control valve

6 / 30

When reversing a semi-trailer, you should:

Tap the throttle gently to begin reversing

Turn the steering wheel in the opposite direction to where you want the trailer to go

Honk the horn only if there are other vehicles or bystanders in the vicinity

Turn the steering wheel in the same direction to where you want to go

7 / 30

Which of the following is not a class of dangerous goods?

Explosives

Toxic substances

Biohazardous substances

Radioactive materials

8 / 30

What are the four factors affecting the distance a commercial vehicle needs to stop?

Brake condition; traction; weight; speed

Traction; speed; perception time; reaction time

Speed; weather; perception time; tire pressure

Speed; brake condition; reaction time; weight

9 / 30

Under which of the following circumstances would a driver not be permitted to drive under federal Hours of Service regulations?

The driver has taken a 36-hour reset and is switching from cycle 1 to cycle 2

The driver has taken only 24 consecutive hours off in the preceding 14 days

A driver on cycle 2 has accumulated 120 hours of on-duty time in 12 days

The driver has already been on duty for 10 hours

10 / 30

Which of the following statements about a carrier's Safety Plan is correct?

Each driver should receive training specified in the company's safety plan and know how to perform their duties properly and safely

Drivers do not need to have documentation such as Bills of Lading and Dangerous Goods documents in their possession as long as the company has a copy

Drivers are responsible for ensuring that the vehicle is being operated in accordance with the owner's policies, regardless of what the law states

Experienced drivers do not need to receive as much training in defensive driving, load security and trip inspections as newer drivers.

11 / 30

What is the maximum time a driver has to deliver a daily log to the employer under this Province's Hours of service legislation?

25 days

20 days

Two months

One month

12 / 30

What is a possible disciplinary action assessed to a carrier due to failing to follow a written safety program?

Designation as a high-risk carrier

Mandatory completion of a special safety course

Immediate loss of licence to operate that type of vehicle

Charges laid in court

13 / 30

When uncoupling a truck tractor from a semi-trailer, when should you lower the landing gear?

Before chocking the semi-trailer wheel

After disconnecting the electrical and air lines and unlocking the fifth wheel

Before disconnecting the electrical and air lines and unlocking the fifth wheel

After you move the tractor-truck ahead so that the fifth wheel just clears the semi-trailer

14 / 30

Clearance lights are required for vehicles that are wider than:

2.05 metres

2.60 metres

1.90 metres

1.75 metres

15 / 30

Which of the following operator's licences is you permitted to apply for as a probationary driver?

Class 1

None of them

Class 3

Class 2

16 / 30

When inspecting the power steering pump and hose during a pre-trip inspection, you should check for the following:

Adequate tension

Proper alignment

Cleanliness

Leaks and fluid level

17 / 30

What should you do when you approach a crossing in a large commercial vehicle and you notice that there is a STOP sign facing you on the opposite side of the tracks?

Perform a U-turn and find a different route

After you have crossed and reached the STOP sign, check that your vehicle is not hanging over the tracks

Before crossing, ensure there are no vehicles behind you

Before crossing, make sure there is sufficient space for your vehicle to clear the tracks when you'll reach the STOP sign

18 / 30

Under what conditions would a private passenger vehicle not be considered ‘for hire' under the Operator Licensing and Vehicle Control Regulation?

When the driver is party to an agreement to provide transportation to only his or her family members

When the total distance travelled during the journey is less than 3km

When the driver is carrying two or fewer passengers

When the passenger is a regular customer and friend of the driver

19 / 30

Which of the following statements about preventative maintenance plans is false?

Small defects discovered during an inspection do not need to be reported to the carrier

Leased vehicles are not exempt from the requirement to follow an established preventative maintenance plan

Every driver is responsible for carrying out inspections required by the owner and required by legislation

On-road inspections received from an enforcement officer must be reported to the carrier

20 / 30

Which of the vehicles below would be required to stop at all uncontrolled railway crossings?

a. A 16-passenger tour bus
b. A truck that has just finished unloading a delivery of flammable liquids
c. A semi-trailer carrying corrosive materials
d. An ambulance

Why are railway crossings potentially more dangerous for larger, heavier commercial vehicles?

a. These vehicles need more time to clear a crossing
b. These vehicles need to stop farther away from a crossing before proceeding safely
c. These vehicles need more speed to clear the crossing
d. These vehicles have to overcome the centrifugal force acting upon them

Corrosive materials can corrode:

a. Internal tissue
b. All answers are correct
c. Human skin
d. Metal

If a 'reserved lane' sign includes a list of hours of the day or days of the week on it, what do these mean?

a. They indicate when the vehicles represented on the sign are not permitted to drive in that
b. They indicate when any vehicle can drive in that lane
c. They indicate when that lane is reserved
d. They indicate when that lane is not reserved

When reversing a semi-trailer, you should:

a. Honk the horn only if there are other vehicles or bystanders in the vicinity
b. Turn the steering wheel in the opposite direction to where you want the trailer to go
c. Tap the throttle gently to begin reversing
d. Turn the steering wheel in the same direction to where you want to go

If safety marks are needed to indicate the presence of dangerous goods, where on the vehicle should they be placed?

At the end of the trailer or transport unit

On the side that will be most visible to other vehicles

On each side and each end of the trailer or transport unit

On the front of the lead trailer

21 / 30

Which of the vehicles below would be required to stop at all uncontrolled railway crossings?

A semi-trailer carrying corrosive materials

An ambulance

A truck that has just finished unloading a delivery of flammable liquids

A 16-passenger tour bus

22 / 30

Who from the choices below is exempt from wearing a seat belt where the assemblies are provided?

Emergency medical responders

The driver of a taxicab when carrying a passenger for hire

Dangerous goods carriers

School bus drivers

23 / 30

Total stopping distance is:

The sum of perception distance, reaction distance, lag time distance and braking distance

The distance travelled from the moment the brakes are applied to the moment the vehicle stops

The sum of the speed and the weight of the vehicle, divided by the amount of traction

The difference between braking distance and reaction distance

24 / 30

When should a defect be reported to the carrier?

Immediately upon discovery of the defect

At the next convenient opportunity for the driver

At the end of the work shift

When submitting the trip inspection report

25 / 30

When conversing with or offering help to someone with disabilities, it is important to:

All answers are correct

Consider their visual, hearing or physical impairment when speaking to them

Identify yourself and provide reassurance about the transportation help you can provide

Respect their desire for personal space

26 / 30

What should you do if you have begun crossing a set of railroad tracks and the crossing lights begin to flash?

Keep driving forward

Stop the vehicle

Get out of the vehicle

Put the vehicle in reverse

27 / 30

Which of the following statements about the holder of a Class 2 operator's licence is false?

He/she may only operate Class 1 and 6 vehicles for learning

He/she may operate any motor vehicle or combination of vehicles that the holder of a Class 3, 4 or 5 operator's licence may operate

He/she must provide a bus with a seating capacity of at least 20 passengers for the road test

An air brake 'Q' endorsement is required to operate air brake equipped vehicles

28 / 30

Which of the following is correct about assisting a person in a wheelchair?

If there are bumps in the pavement, turn around and reverse the wheelchair over them

Fold back the foot rests because they could bang into something

Ensure that the wheelchair brakes are applied when the wheelchair is stopped

Focus your attention on the person instead of the ground while pushing the wheelchair

29 / 30

Which of the statements below about making a turn with a school bus is false?

Check the mirrors as you are turning for swing and clearance

When stopped waiting to turn left, point the front wheels to a ten o'clock position

Use the outer left turning lane when dual left turn lanes are available

Avoid shifting gears during the turn

30 / 30

Ultimately, whose responsibility is it to ensure that employees have the proper training to work safely with dangerous goods?

The employee

The training provider

A dangerous goods inspector

The carrier

Your score is

BRITISH COLUMBIA CLASS 1 LICENCE TEST 2023

What is a Class 1 Licence in British Columbia?

A Class 1 Licence in British Columbia allows you to operate a motor vehicle with a gross vehicle weight rating (GVWR) over 11,794 kg or any combination of vehicles where the towed vehicle has a GVWR of more than 4,600 kg.

Who is eligible to apply for a Class 1 Licence in British Columbia?

To be eligible for a Class 1 Licence, you must be at least 19 years old and have a Class 5 (full-privilege) driver’s licence in British Columbia.

What are the steps to obtain a Class 1 Licence in British Columbia?

The steps generally include passing a knowledge test, obtaining a learner’s Class 1 licence, completing a training program (if applicable), and passing a road test. The road test typically consists of a pre-trip inspection, an air brake test (if applicable), and a practical driving examination.

What topics are covered in the Class 1 Licence knowledge test?

The knowledge test includes questions related to air brakes (if applicable), safe driving practices, traffic laws and regulations, and general knowledge about operating Class 1 vehicles.

How can I prepare for the Class 1 Licence knowledge test in British Columbia?

You can prepare for the knowledge test by studying the British Columbia Commercial Driving Manual, which is available online. You can also take practice tests to assess your knowledge and identify areas where you might need additional study.

Do I need to take an air brake endorsement test for a Class 1 Licence?

If you plan to operate vehicles equipped with air brakes, you will need to obtain an air brake endorsement. This may require passing an air brake knowledge test in addition to the Class 1 Licence knowledge test.

What are the fees associated with getting a Class 1 Licence in British Columbia?

The fees for a Class 1 Licence can vary, and they may include the knowledge test fee, learner’s licence fee, and road test fee. There may also be additional costs for any required training programs.

Are there age restrictions for obtaining a Class 1 Licence in British Columbia?

Yes, you must be at least 19 years old to apply for a Class 1 Licence in British Columbia.

Is there a waiting period between passing the knowledge test and taking the road test for a Class 1 Licence?

The waiting period can vary, but generally, you will need to hold a Class 1 Learner’s Licence for a certain period and gain practical experience before taking the road test. This waiting period may be several months.

How long is a Class 1 Licence valid in British Columbia?

In British Columbia, a Class 1 Licence is typically valid for five years. You will need to renew it before the expiry date to continue driving commercially.

What is the difference between a Class 1 Licence and other commercial driver’s licences, like Class 2 or Class 3?

Class 1 allows you to drive the heaviest and most complex vehicles, typically tractor-trailers or semi-trucks. Class 2 and 3 licences are for buses and trucks of lighter classifications, respectively.

Please note that regulations and requirements may change over time, so it’s important to check with the British Columbia Ministry of Transportation and Infrastructure or visit their official website for the most up-to-date information regarding Class 1 Licence requirements and testing procedures.

Which of the following belts should you check during a pre-trip inspection:

When parking a single unit Class 3 motor vehicle uphill, without a curb, the front wheels should be:

What is the maximum permissible length for a straight truck?

If a 'reserved lane' sign includes a list of hours of the day or days of the week on it, what do these mean?

If doing a pre-trip air brake inspection, which of the below would be acceptable pressure levels for the air supply valve and park control valve to pop out at?

When reversing a semi-trailer, you should:

Which of the following is not a class of dangerous goods?

What are the four factors affecting the distance a commercial vehicle needs to stop?

Under which of the following circumstances would a driver not be permitted to drive under federal Hours of Service regulations?

Which of the following statements about a carrier's Safety Plan is correct?

What is the maximum time a driver has to deliver a daily log to the employer under this Province's Hours of service legislation?

What is a possible disciplinary action assessed to a carrier due to failing to follow a written safety program?

When uncoupling a truck tractor from a semi-trailer, when should you lower the landing gear?

Clearance lights are required for vehicles that are wider than:

Which of the following operator's licences is you permitted to apply for as a probationary driver?

When inspecting the power steering pump and hose during a pre-trip inspection, you should check for the following:

What should you do when you approach a crossing in a large commercial vehicle and you notice that there is a STOP sign facing you on the opposite side of the tracks?

Under what conditions would a private passenger vehicle not be considered ‘for hire' under the Operator Licensing and Vehicle Control Regulation?

Which of the following statements about preventative maintenance plans is false?

If safety marks are needed to indicate the presence of dangerous goods, where on the vehicle should they be placed?

Which of the vehicles below would be required to stop at all uncontrolled railway crossings?

Who from the choices below is exempt from wearing a seat belt where the assemblies are provided?

Total stopping distance is:

When should a defect be reported to the carrier?

When conversing with or offering help to someone with disabilities, it is important to:

What should you do if you have begun crossing a set of railroad tracks and the crossing lights begin to flash?

Which of the following statements about the holder of a Class 2 operator's licence is false?

Which of the following is correct about assisting a person in a wheelchair?

Which of the statements below about making a turn with a school bus is false?

Ultimately, whose responsibility is it to ensure that employees have the proper training to work safely with dangerous goods?

BRITISH COLUMBIA CLASS 1 LICENCE TEST 2023

For More Practice Watch our Videos

BC driver handbook

Leave a Comment Cancel Reply

Which of the following belts should you check during a pre-trip inspection:

When parking a single unit Class 3 motor vehicle uphill, without a curb, the front wheels should be:

What is the maximum permissible length for a straight truck?

If a 'reserved lane' sign includes a list of hours of the day or days of the week on it, what do these mean?

If doing a pre-trip air brake inspection, which of the below would be acceptable pressure levels for the air supply valve and park control valve to pop out at?

When reversing a semi-trailer, you should:

Which of the following is not a class of dangerous goods?

What are the four factors affecting the distance a commercial vehicle needs to stop?

Under which of the following circumstances would a driver not be permitted to drive under federal Hours of Service regulations?

Which of the following statements about a carrier's Safety Plan is correct?

What is the maximum time a driver has to deliver a daily log to the employer under this Province's Hours of service legislation?

What is a possible disciplinary action assessed to a carrier due to failing to follow a written safety program?

When uncoupling a truck tractor from a semi-trailer, when should you lower the landing gear?

Clearance lights are required for vehicles that are wider than:

Which of the following operator's licences is you permitted to apply for as a probationary driver?

When inspecting the power steering pump and hose during a pre-trip inspection, you should check for the following:

What should you do when you approach a crossing in a large commercial vehicle and you notice that there is a STOP sign facing you on the opposite side of the tracks?

Under what conditions would a private passenger vehicle not be considered ‘for hire' under the Operator Licensing and Vehicle Control Regulation?

Which of the following statements about preventative maintenance plans is false?

If safety marks are needed to indicate the presence of dangerous goods, where on the vehicle should they be placed?

Which of the vehicles below would be required to stop at all uncontrolled railway crossings?

Who from the choices below is exempt from wearing a seat belt where the assemblies are provided?

Total stopping distance is:

When should a defect be reported to the carrier?

When conversing with or offering help to someone with disabilities, it is important to:

What should you do if you have begun crossing a set of railroad tracks and the crossing lights begin to flash?

Which of the following statements about the holder of a Class 2 operator's licence is false?

Which of the following is correct about assisting a person in a wheelchair?

Which of the statements below about making a turn with a school bus is false?

Ultimately, whose responsibility is it to ensure that employees have the proper training to work safely with dangerous goods?

BRITISH COLUMBIA CLASS 1 LICENCE TEST 2023

For More Practice Watch our Videos

BC driver handbook

Related Posts

Leave a Comment Cancel Reply