BRITISH COLUMBIA CLASS 1 LICENCE TEST 1

0 votes, 0 avg
44

BRITISH COLUMBIA CLASS 1 LICENCE TEST 1

1 / 30

What does having the 'S' condition code on Class 1, 2, or 4 licences signify?

2 / 30

Which of the following road surfaces will help you achieve the best fuel efficiency?

3 / 30

Which of the following factors would not generally have an influence on perception time?

 

4 / 30

Qualifying for an air brake endorsement is mandatory to obtain what type of licence?

5 / 30

When is an air brake 'Q' endorsement required?

6 / 30

Which of the following is not considered a Class 4 vehicle?

7 / 30

Which of the following statements about long combination vehicles is incorrect?

8 / 30

What is the minimum seating capacity (including the driver) for a commercial vehicle to be considered a 'bus' under the Traffic Safety Act?

9 / 30

What are the warning signs of driver fatigue?

10 / 30

What is the difference between an A Train and a C Train?

11 / 30

Which of the following is the correct procedure for stopping at an uncontrolled railway crossing with a Class 2 vehicle?

 

  • a. Stop at least 15 metres in advance of track
  • b. Activate the alternately flashing amber or red lights wrong
  • c. If on a multi-lane highway, move to the far right lane in advance of the crossing correct
  • d. Leave the front door closed at all times

 

 

As a school bus driver, you should never:

 

  • a. Break the four-second following rule
  • b. Drive with open front doors
  • c. All answers are correct 
  • d. Refuel a bus with passengers aboard wrong

 

 

When preparing to discharge a fire extinguisher to put out a fire, you should hold the extinguisher in what position?

 

  • a. Parallel to the ground
  • b. However you can get the tightest grip
  • c. In line with the top of the flameswrong
  • d. Uprightcorrect

 

 

How many hazard classes of dangerous goods are there?

 

  • a. 9correct
  • b. 7
  • c. 6wrong
  • d. 8

 

 

Which of the statements below about making a turn with a school bus is false?

 

  • a. When stopped waiting to turn left, point the front wheels to a ten o'clock position correct
  • b. Avoid shifting gears during the turn wrong
  • c. Use the outer left turning lane when dual left turn lanes are available
  • d. Check the mirrors as you are turning for swing and clearance

 

 

When parking a single unit Class 3 motor vehicle uphill, without a curb, the front wheels should be:

 

  • a. Pointed straight ahead
  • b. On the grass or sidewalk
  • c. Turned to the left
  • d. Turned to the right correct

 

 

An oxidizing substance is defined as:

 

  • a. A substance that contributes to the combustion of other material by yielding oxygen correct
  • b. A substance that might spontaneously combust when exposed to air wrong
  • c. A substance or article that explodes as a mass
  • d. An organism that is believed to be infectious to humans

 

 

You are driving a school bus on a foggy day with low visibility, and you stop at an uncontrolled railway crossing. What is the best course of action to ensure safety?

 

  • a. Proceed very slowly towards the tracks beyond the normal 5 metre stopping distance to get a closer look wrong
  • b. Walk to the track yourself to see if you can cross safely, remembering to shut off the engine and set the brakes firstcorrect
  • c. Instruct one of the passengers to walk to the track to see if there are any trains coming
  • d. Listen very carefully for a train whistle, and if proceed carefully if you do not hear one

 

 

What is the correct order of actions when operating a fire extinguisher?

 

  • a. Pull; Aim; Squeeze; Sweepcorrect
  • b. Aim; Pull; Squeeze; Sweep
  • c. Sweep; Aim; Pull; Squeezewrong
  • d. Aim; Squeeze; Sweep; Pull

 

 

When reversing to unload a dump vehicle, you should:

 

  • a. Use the backing alarm if the vehicle is equipped with onecorrect
  • b. Avoid using your mirrors and rely entirely on the hand signals of the guide
  • c. Position the guide so that he or she can see your path, but cannot be seen by youwrong
  • d. Back the vehicle to the passenger's side (right)

 

 

When going through urban areas, all drivers must:

 

  • a. Stop before every uncontrolled railway crossing
  • b. Encourage other vehicles to pass you before making left turnswrong
  • c. Activate the emergency hazard lights during night-time hours
  • d. Drive only on the routes specified for trucks and dangerous goods vehicles, correct

 

 

If you are operating an ambulance during an emergency, you could use the red flashing overhead lights and not the siren when:

12 / 30

If you are a school bus driver and there is a breakdown, the best course of action is to:

13 / 30

How should you test the service brakes of a truck tractor?

14 / 30

Which of the following statements about a carrier's Safety Plan is correct?

15 / 30

Which of the statements below about making a turn with a school bus is false?

16 / 30

Which of the following statements is true about the holder of a Class 3 operator's licence?

17 / 30

When parking a single unit Class 3 motor vehicle uphill, without a curb, the front wheels should be:

18 / 30

Which of the following is not required as part of a carrier's Safety Plan?

19 / 30

Which of the following is true of a truck registered for a weight of 10,000 kilograms being driven solely in this Province?

20 / 30

Which of the following situations could be unsafe when unloading a Class 3 vehicle into a hopper?

21 / 30

What is the most critical task in the coupling procedure?

 

22 / 30

Low-speed off-tracking:

23 / 30

What is lag time?

24 / 30

What is considered a safe distance from the bus to bring your passengers if you notice a fire while on route?

25 / 30

Which of the following statements about preventative maintenance plans is false?

26 / 30

Carriers operating a tractor outside of this Province are required to obtain a Safety Fitness Certificate if the vehicle weighs in excess of:

27 / 30

Under which of the following circumstances is a trip inspection report invalid?

28 / 30

If three identical vehicles travel at the same speeds, but one is on a level surface, one is going uphill, and one is going downhill, which will have the shortest stopping distance?

 

29 / 30

What is not included in the official definition of a semi-trailer?

30 / 30

If doing a pre-trip air brake inspection, which of the below would be acceptable pressure levels for the air supply valve and park control valve to pop out at?

 

BRITISH COLUMBIA CLASS 1 LICENCE TEST 2023

What is a Class 1 Licence in British Columbia?

A Class 1 Licence in British Columbia allows you to operate a motor vehicle with a gross vehicle weight rating (GVWR) over 11,794 kg or any combination of vehicles where the towed vehicle has a GVWR of more than 4,600 kg.

Who is eligible to apply for a Class 1 Licence in British Columbia?

To be eligible for a Class 1 Licence, you must be at least 19 years old and have a Class 5 (full-privilege) driver’s licence in British Columbia.

What are the steps to obtain a Class 1 Licence in British Columbia?

The steps generally include passing a knowledge test, obtaining a learner’s Class 1 licence, completing a training program (if applicable), and passing a road test. The road test typically consists of a pre-trip inspection, an air brake test (if applicable), and a practical driving examination.

What topics are covered in the Class 1 Licence knowledge test?

The knowledge test includes questions related to air brakes (if applicable), safe driving practices, traffic laws and regulations, and general knowledge about operating Class 1 vehicles.

How can I prepare for the Class 1 Licence knowledge test in British Columbia?

You can prepare for the knowledge test by studying the British Columbia Commercial Driving Manual, which is available online. You can also take practice tests to assess your knowledge and identify areas where you might need additional study.

Do I need to take an air brake endorsement test for a Class 1 Licence?

If you plan to operate vehicles equipped with air brakes, you will need to obtain an air brake endorsement. This may require passing an air brake knowledge test in addition to the Class 1 Licence knowledge test.

What are the fees associated with getting a Class 1 Licence in British Columbia?

The fees for a Class 1 Licence can vary, and they may include the knowledge test fee, learner’s licence fee, and road test fee. There may also be additional costs for any required training programs.

Are there age restrictions for obtaining a Class 1 Licence in British Columbia?

Yes, you must be at least 19 years old to apply for a Class 1 Licence in British Columbia.

Is there a waiting period between passing the knowledge test and taking the road test for a Class 1 Licence?

The waiting period can vary, but generally, you will need to hold a Class 1 Learner’s Licence for a certain period and gain practical experience before taking the road test. This waiting period may be several months.

How long is a Class 1 Licence valid in British Columbia?

In British Columbia, a Class 1 Licence is typically valid for five years. You will need to renew it before the expiry date to continue driving commercially.

What is the difference between a Class 1 Licence and other commercial driver’s licences, like Class 2 or Class 3?

Class 1 allows you to drive the heaviest and most complex vehicles, typically tractor-trailers or semi-trucks. Class 2 and 3 licences are for buses and trucks of lighter classifications, respectively.

Please note that regulations and requirements may change over time, so it’s important to check with the British Columbia Ministry of Transportation and Infrastructure or visit their official website for the most up-to-date information regarding Class 1 Licence requirements and testing procedures.

BC driver handbook

Leave a Comment

Your email address will not be published. Required fields are marked *