BRITISH COLUMBIA CLASS 1 LICENCE TEST 2

0 votes, 0 avg

1 / 30

What is considered a safe distance from the bus to bring your passengers if you notice a fire while on route?

50 metres

100 metres

35 metres

25 metres

2 / 30

To safely complete a left turn in a large vehicle, it is recommended that you:

Merge into the farthest right as soon as your turning arc is complete

Use engine compression to control your speed during the turn

Use a fixed hand steering method to maintain control of the vehicle

Ensure a wide enough turning arc to allow the vehicle to off-track on left side without crossing the centre line

3 / 30

Which best describes the effect of centrifugal force on a vehicle when entering a curve?

It increases the speed of the vehicle

It causes the vehicle to skid and roll over

It pushes the vehicle to the outside of the curve

It reduces the friction between the vehicle and the road surface

4 / 30

Which of the following statements is true about the holder of a Class 3 operator's licence?

He/she may operate all motor vehicles under Classes 1, 2, 4 and 6 for learning only

He/she can transport passengers for hire as long as the motor vehicle has a seating capacity of less than 15 people

He/she may operate any motor vehicle or combination of vehicles that the holder of a Class 5 operator's licence may operate

He/she can operate a single motor vehicle with three or more axles towing any type of trailer with one or more axles

5 / 30

Corrosive materials can corrode:

Internal tissue

Human skin

All answers are correct

Metal

6 / 30

To lower the risk of fire, you should:

Drive back to your home terminal immediately if you notice a fuel leak after having taken a rest break

Gently ‘drag' the brakes when the vehicle is in motion

Touch the fuel hose nozzle against the filler pipe before filling up with fuel

Leave your engine running while refuelling

7 / 30

When uncoupling a truck tractor from a semi-trailer, when should you lower the landing gear?

After you move the tractor-truck ahead so that the fifth wheel just clears the semi-trailer

Before disconnecting the electrical and air lines and unlocking the fifth wheel

After disconnecting the electrical and air lines and unlocking the fifth wheel

Before chocking the semi-trailer wheel

8 / 30

Which of the following is not a class of dangerous goods?

Biohazardous substances

Toxic substances

Radioactive materials

Explosives

9 / 30

Which of the following belts should you check during a pre-trip inspection:

Alternator belt

Power steering belt

Water pump belt

All belts on the front of the engine

10 / 30

Emergency medical responders driving with their sirens on are granted special driving permissions, but they are not able to:

Drive the vehicle in excess of the speed limit

Discard any and all laws under the Traffic Safety Act

Proceed through stop signs without stopping

Park in a designated loading zone

11 / 30

What is the purpose of a trip inspection?

Ensure the early identification of a vehicle problem and defects before the vehicle is operated on the highway

Ensure the driver is aware of the major and minor defects he may have to deal while operating the vehicle on the highway

Ensure compliance with the provincial and federal legislation

Ensure the driver has the training and knowledge needed to safely operate the vehicle on the highway

12 / 30

What is lag time?

The amount of time it takes for the air brake system to respond after the driver has applied pressure on the brake pedal

The amount of time it takes between deciding to stop and actually applying pressure to the brake pedal

The sum of the perception time and the driver reaction time

The amount of time it takes for the driver to notice the need to stop if he or she is not paying attention

13 / 30

What lights would not be found at the rear of the vehicle of a bus?

All of these lights would be found at the rear

Clearance and marker lights

Alternating amber and red flashing lights

White flashing strobe light

14 / 30

What are the warning signs of driver fatigue?

The feeling that vehicles in the rear view mirror appeared out of nowhere

Accidentally drifting into other lanes

Daydreaming and disconnected thoughts

All answers are correct

15 / 30

A vehicle inspection at a rest and check stop does not need to include which of the following:

The tires are properly inflated and are not hot

There are no air leaks

The left and right turn signals work

The load is secure

16 / 30

What is not included in the official definition of a semi-trailer?

While being towed, it is supported at its front end by the truck tractor or the immediately preceding trailer

When connected to the truck tractor or preceding trailer, it is connected by means of a kingpin and a fifth wheel

It has axles only at or near its rear end

It has axles either at its front or rear ends

17 / 30

To safely make a right turn in a large vehicle, it is recommended that you:

Drive well into the intersection before starting the turn

Veer into the left lane before making your turn to give yourself more space to turn

Allow your rear wheels to mount the curb if there is no obstruction

Allow for high speed off-tracking to counteract the centrifugal force

18 / 30

When coupling a truck-tractor to a semi-trailer:

The jaws of the fifth wheel should be in the locked position before coupling

Corrections should be made if you notice slack during the tug test

It is essential that you have chocks at the front and rear of the semi-trailer wheel

The fifth wheel should be higher than the semi-trailer before making the connection

19 / 30

How many hazard classes of dangerous goods are there?

20 / 30

What is the most accurate definition of traction?

Traction is the amount of contact made between the front tires and the road surface

Traction is the distance required for a vehicle to stop under ideal road conditions

Traction is the friction between the road surface and the area where the tire contacts that surface

Traction is the resistance generated between a rough road surface and worn tires

21 / 30

Which of the statements below about making a turn with a school bus is false?

Avoid shifting gears during the turn

Use the outer left turning lane when dual left turn lanes are available

When stopped waiting to turn left, point the front wheels to a ten o'clock position

Check the mirrors as you are turning for swing and clearance

22 / 30

Which of the following statements about braking force is false? Assume that the two vehicles are identical except for weight and speed.

A vehicle weighing 4000kg will require twice the braking force of a vehicle weighing 2000kg

A vehicle travelling at 80kph will require four times the braking force of a vehicle travelling at 40kph

A vehicle weighing 1500kg will require half the braking force of a vehicle weighing 3000kg

A vehicle weighing 4000kg and travelling at 50kph will require the same braking force as a vehicle weighing 2000kg and travelling at 100kph

23 / 30

Low-speed off-tracking:

Is when centrifugal force is greater than traction when entering a curve

Is when the rear tires pull outward from the steering path

Is when the rear tires are pulled inward of the steering path

The driver makes a right turn

24 / 30

As a school bus driver, you should never:

Drive with open front doors

All answers are correct

Break the four-second following rule

Refuel a bus with passengers aboard

25 / 30

Which of the following statements about the federal Hours of service regulations is true?

Drivers can change between cycle 1 and cycle 2 as long as they notify their carrier

During a work shift a driver is not permitted to drive more than 13 hours

In each day a driver must take 10 hours of consecutive off-duty time

The federal regulations are less restrictive than the Alberta regulations

26 / 30

Which is not one of the four conditions for having the daily log requirement waived under Alberta's Hours of service legislation?

The driver starts and ends the work shifts at the same place

The driver stays within a 160km radius of the home terminal

The work shift does not exceed 15 hours

There are fewer than 8 hours of on-duty driving time during a shift

27 / 30

If three identical vehicles travel at the same speeds, but one is on a level surface, one is going uphill, and one is going downhill, which will have the shortest stopping distance?

The vehicle travelling uphill

The vehicle travelling on the level surface

All three vehicles will have the same stopping distance

The vehicle travelling downhill

28 / 30

Clearance lights are required for vehicles that are wider than:

1.75 metres

2.05 metres

2.60 metres

1.90 metres

29 / 30

What are the four factors affecting the distance a commercial vehicle needs to stop?

Speed; brake condition; reaction time; weight

Brake condition; traction; weight; speed

Traction; speed; perception time; reaction time

Speed; weather; perception time; tire pressure

30 / 30

Which of the following statements is true about a B Train coupling mechanism?

The fifth wheel assembly sits on the rear axle of the lead trailer

The B Train is a safer coupling mechanism than the A Train

The B Train is the optimal connection for carrying heavy loads

An independent converter dolly is required

Your score is

BRITISH COLUMBIA CLASS 1 LICENCE TEST 2023

What is a Class 1 Licence in British Columbia?

A Class 1 Licence in British Columbia allows you to operate a motor vehicle with a gross vehicle weight rating (GVWR) over 11,794 kg or any combination of vehicles where the towed vehicle has a GVWR of more than 4,600 kg.

Who is eligible to apply for a Class 1 Licence in British Columbia?

To be eligible for a Class 1 Licence, you must be at least 19 years old and have a Class 5 (full-privilege) driver’s licence in British Columbia.

What are the steps to obtain a Class 1 Licence in British Columbia?

The steps generally include passing a knowledge test, obtaining a learner’s Class 1 licence, completing a training program (if applicable), and passing a road test. The road test typically consists of a pre-trip inspection, an air brake test (if applicable), and a practical driving examination.

What topics are covered in the Class 1 Licence knowledge test?

The knowledge test includes questions related to air brakes (if applicable), safe driving practices, traffic laws and regulations, and general knowledge about operating Class 1 vehicles.

How can I prepare for the Class 1 Licence knowledge test in British Columbia?

You can prepare for the knowledge test by studying the British Columbia Commercial Driving Manual, which is available online. You can also take practice tests to assess your knowledge and identify areas where you might need additional study.

Do I need to take an air brake endorsement test for a Class 1 Licence?

If you plan to operate vehicles equipped with air brakes, you will need to obtain an air brake endorsement. This may require passing an air brake knowledge test in addition to the Class 1 Licence knowledge test.

What are the fees associated with getting a Class 1 Licence in British Columbia?

The fees for a Class 1 Licence can vary, and they may include the knowledge test fee, learner’s licence fee, and road test fee. There may also be additional costs for any required training programs.

Are there age restrictions for obtaining a Class 1 Licence in British Columbia?

Yes, you must be at least 19 years old to apply for a Class 1 Licence in British Columbia.

Is there a waiting period between passing the knowledge test and taking the road test for a Class 1 Licence?

The waiting period can vary, but generally, you will need to hold a Class 1 Learner’s Licence for a certain period and gain practical experience before taking the road test. This waiting period may be several months.

How long is a Class 1 Licence valid in British Columbia?

In British Columbia, a Class 1 Licence is typically valid for five years. You will need to renew it before the expiry date to continue driving commercially.

What is the difference between a Class 1 Licence and other commercial driver’s licences, like Class 2 or Class 3?

Class 1 allows you to drive the heaviest and most complex vehicles, typically tractor-trailers or semi-trucks. Class 2 and 3 licences are for buses and trucks of lighter classifications, respectively.

Please note that regulations and requirements may change over time, so it’s important to check with the British Columbia Ministry of Transportation and Infrastructure or visit their official website for the most up-to-date information regarding Class 1 Licence requirements and testing procedures.

What is considered a safe distance from the bus to bring your passengers if you notice a fire while on route?

To safely complete a left turn in a large vehicle, it is recommended that you:

Which best describes the effect of centrifugal force on a vehicle when entering a curve?

Which of the following statements is true about the holder of a Class 3 operator's licence?

Corrosive materials can corrode:

To lower the risk of fire, you should:

When uncoupling a truck tractor from a semi-trailer, when should you lower the landing gear?

Which of the following is not a class of dangerous goods?

Which of the following belts should you check during a pre-trip inspection:

Emergency medical responders driving with their sirens on are granted special driving permissions, but they are not able to:

What is the purpose of a trip inspection?

What is lag time?

What lights would not be found at the rear of the vehicle of a bus?

What are the warning signs of driver fatigue?

A vehicle inspection at a rest and check stop does not need to include which of the following:

What is not included in the official definition of a semi-trailer?

To safely make a right turn in a large vehicle, it is recommended that you:

When coupling a truck-tractor to a semi-trailer:

How many hazard classes of dangerous goods are there?

What is the most accurate definition of traction?

Which of the statements below about making a turn with a school bus is false?

Which of the following statements about braking force is false? Assume that the two vehicles are identical except for weight and speed.

Low-speed off-tracking:

As a school bus driver, you should never:

Which of the following statements about the federal Hours of service regulations is true?

Which is not one of the four conditions for having the daily log requirement waived under Alberta's Hours of service legislation?

If three identical vehicles travel at the same speeds, but one is on a level surface, one is going uphill, and one is going downhill, which will have the shortest stopping distance?

Clearance lights are required for vehicles that are wider than:

What are the four factors affecting the distance a commercial vehicle needs to stop?

Which of the following statements is true about a B Train coupling mechanism?

BRITISH COLUMBIA CLASS 1 LICENCE TEST 2023

For More Practice Watch our Videos

BC driver handbook

Leave a Comment Cancel Reply

What is considered a safe distance from the bus to bring your passengers if you notice a fire while on route?

To safely complete a left turn in a large vehicle, it is recommended that you:

Which best describes the effect of centrifugal force on a vehicle when entering a curve?

Which of the following statements is true about the holder of a Class 3 operator's licence?

Corrosive materials can corrode:

To lower the risk of fire, you should:

When uncoupling a truck tractor from a semi-trailer, when should you lower the landing gear?

Which of the following is not a class of dangerous goods?

Which of the following belts should you check during a pre-trip inspection:

Emergency medical responders driving with their sirens on are granted special driving permissions, but they are not able to:

What is the purpose of a trip inspection?

What is lag time?

What lights would not be found at the rear of the vehicle of a bus?

What are the warning signs of driver fatigue?

A vehicle inspection at a rest and check stop does not need to include which of the following:

What is not included in the official definition of a semi-trailer?

To safely make a right turn in a large vehicle, it is recommended that you:

When coupling a truck-tractor to a semi-trailer:

How many hazard classes of dangerous goods are there?

What is the most accurate definition of traction?

Which of the statements below about making a turn with a school bus is false?

Which of the following statements about braking force is false? Assume that the two vehicles are identical except for weight and speed.

Low-speed off-tracking:

As a school bus driver, you should never:

Which of the following statements about the federal Hours of service regulations is true?

Which is not one of the four conditions for having the daily log requirement waived under Alberta's Hours of service legislation?

If three identical vehicles travel at the same speeds, but one is on a level surface, one is going uphill, and one is going downhill, which will have the shortest stopping distance?

Clearance lights are required for vehicles that are wider than:

What are the four factors affecting the distance a commercial vehicle needs to stop?

Which of the following statements is true about a B Train coupling mechanism?

BRITISH COLUMBIA CLASS 1 LICENCE TEST 2023

For More Practice Watch our Videos

BC driver handbook

Related Posts

Leave a Comment Cancel Reply